Download Print this page

Advertisement

Quick Links

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF
EQUIPMENT. TO MINIMIZE RISK, YOU MUST FOLLOW THESE RULES:
1.Inspect equipment before each workout. Check that all nuts, bolts, screws and
2.Keep clear of the cylinder and all moving parts when the machine is in use.
3.Exercise with care. Perform your exercises at a smooth moderate pace; never
4.It is recommended that you should workout with a training partner.
5.Do not allow children or minors to play on or around this equipment.
6.If unsure of proper use of equipment, call your local distributor.
7.WARNING: Consult your physician before starting your exercise program. For your
CSQ-1200
pop pins are in place and fully tightened. Also, before use, check cylinders for leaking.
Replace all worn parts immediately. Never use machine if any parts are
damaged or missing. Fallure to follow these rules may result in serious injury.
perform jerky or uncoordinated movements that may cause injury.
own safety do not begin any exercise program without proper instruction.
OWNER'S MANUAL
The Surgeon General
has determined that lack
of physical activity is
detrimental to your health.
TM
Trademark of United States Fitness Produots Council

Advertisement

loading
Need help?

Need help?

Do you have a question about the CSQ-1200 and is the answer not in the manual?

Questions and answers

Summary of Contents for SteelFlex CSQ-1200

  • Page 1 5.Do not allow children or minors to play on or around this equipment. 6.If unsure of proper use of equipment, call your local distributor. 7.WARNING: Consult your physician before starting your exercise program. For your own safety do not begin any exercise program without proper instruction. CSQ-1200 OWNER'S MANUAL...
  • Page 2 CSQ-1200 ASSEMBLY INSTRUCTIONS HARDWARE ILLUSTRATION (A1)ROUND ALLEN HEAD M8x40L PARTIAL THREAD QTY.2 (A2)ROUND ALLEN HEAD M8x45L PARTIAL THREAD QTY.2 (A3)HEX HEAD BOLT M10X65L PARTIAL THREAD QTY.2 (A4)SOCKER FLAT HEAD SCREW M10X25L PARTIAL THREAD QTY.4 (A5)HEX HEAD BOLT M12X80L PARTIAL THREAD QTY.2 inch 1"...
  • Page 3 CSQ-1200 ASSEMBLY INSTRUCTIONS HARDWARE ILLUSTRATION (A6)ALLEN SCREW M5X4L FULL THREAD QTY.4 inch 1" 2" 3" 5" 6" 4" CSQ1200-082017 Page...
  • Page 4: Hardware Illustration

    CSQ-1200 ASSEMBLY INSTRUCTIONS HARDWARE ILLUSTRATION (B1)NYLON LOCK NUT M8 QTY.4 (C4)M10(I.D.)FLAT WASHER Ø27X1.6T QTY.2 (B2)NYLON LOCK NUT M10 QTY.2 (C5)M12(I.D.)FLAT WASHER Ø34X3T QTY.2 (C1) 3/8" ROUDN END CAP WASHER QTY.2 (C6)M20 WASHERØ30 QTY.4 (C2)M8(I.D.)FLAT WASHER Ø18X1.5T QTY.4 (C3)M8(I.D.)FLAT WASHER Ø24X1.6T QTY.4 (C7)1/2"...
  • Page 5 CSQ-1200 ASSEMBLY INSTRUCTIONS HARDWARE ILLUSTRATION D1. Ø16.1XØ8X22.5L STEEL BUSHING(8110-150)----------[2PCS]  50X10 END COVER (8130-131)----------------------------[4PCS]  35XØ26X19L STEEL BUSHING (8890-079)------------[2PCS]  64X24H PULLEY (9213-023)--------------------------------[2PCS] D5. 3" NylON WASHER (9214-008)------------------------------[4PCS]  60X42H DECK BUFFER (9214-037)----------------------[2PCS]  0X80 ROUND END COVER (9261-070)-----------------[2PCS] CSQ1200-082017...
  • Page 6 CSQ-1200 ASSEMBLY INSTRUCTIONS PARTS ILLUSTRATION SHEET A[1PCS] B[1PCS] C[1PCS] F[2PCS] D[1PCS] E[2PCS] 8220-149 Ø20X89L I[2PCS] G[1PCS] H[1PCS] 9161-077 8386-101 8830-017 Ø101XØ25.6X200L CSQ1200-082017 Page...
  • Page 7 CSQ-1200 ASSEMBLY INSTRUCTIONS Above shows STEP 1 assembled and completed CSQ1200-082017 Page...
  • Page 8 CSQ-1200 ASSEMBLY INSTRUCTIONS Above shows STEP 2 assembled and completed M10X25L CONE SCREW M10X25L CONE SCREW STEP 1 CSQ1200-082017 Page...
  • Page 9 CSQ-1200 ASSEMBLY INSTRUCTIONS Above shows STEP 3 assembled and completed M10X25L CONE SCREW STEP 2 M10X25L CONE SCREW CSQ1200-082017 Page...
  • Page 10 CSQ-1200 ASSEMBLY INSTRUCTIONS Above shows STEP 3 assembled and completed M10X25L CONE SCREW STEP 2 M10X25L CONE SCREW CSQ1200-082017 Page...