Setting Up Speakerlink - Meridian 861v8 User Manual

Setting up SpeakerLink

The SpeakerLink outputs provide control information to
DSP loudspeakers along with the digital audio.
If you have configured the 861 via the Meridian
Configuration Application (see Installing the Meridian
Configuration Application , page 57) then you may have
access to extra menus available in the DSP presets;
these will depend on the speakers in your layout.
If you are configuring the 861 from the front panel
alone then you have the option of enabling or disabling
the SpeakerLink controls manually.
You may need to update the firmware in your DSP
loudspeakers to access these features.
To enable the SpeakerLink controls
• Put the digital surround controller into standby by
pressing Off (front panel or remote).
• Press > under the front panel to show the current
setting.
For example: SpeakerLink Off
Press > again to step between the options: Off,
•
As Conf. (which uses the settings from the
configuration), or On.
55
Configuring the 861
Reference Digital
Surround Controller