Defining Your Own Presets - Meridian 861v8 User Manual

26
Customising the 861

Defining your own presets

Reference Digital
Surround Controller
The 861 Reference Digital Surround Controller allows
you to modify any of the built-in presets, and save
them for future use.
You can either save the changes to the built-in preset,
or you can create up to 10 presets of your own, with
names of your choice, so you can use them alongside
the built-in presets.
To save the preset settings
Make sure the menus are unlocked; see To unlock
•
the menus , page 16.
Press DSP (front panel or remote) to select the
•
preset you want to modify.
• Change the preset parameters to the values you want
to store; see To change a DSP parameter , page 18.
• Press Store (remote or under the front panel).
The display shows the next available user-defined
preset.
For example:
• If you want to overwrite an existing user-defined
preset press A to select the preset you want to
overwrite.
For example:
Alternatively press V to choose the built-in preset you
started with.
For example:
• Press Store (remote or under the front panel).
The settings have been stored in the new or existing
preset you selected.
If you are defining a user preset you can now edit the
name of the preset if you wish.
Store User 1
Store Classical
Store Trifield
• A flashing cursor shows the letter you are editing:
Store
• Press > or < to select the character position you
want to edit.
• Press A or V to change the character.
Each press steps through the sequence A to Z, a to z,
0 to 9, full stop, and blank. You can also select a blank
directly by pressing Clear on the remote.
For example, you could change the name to:
Store
• When you have entered the name you want to use
press Store.
Stored
The display shows:
To make the new preset the default for the current
source and audio format:
• Press Assign (under the front panel).
To clear a user-defined preset
• Make sure the menus are unlocked; see To unlock
the menus , page 16.
• Press DSP (front panel) or Preset (remote) to
select the preset you want to clear.
• Press and hold down Clear (remote) for several
seconds.
Preset Clear
The display shows:
If you clear a preset that was saved over a built-in
preset, the original preset name and settings are
restored.
•ser 1
La Scala