D-Link DES-3326 User Manual page 214

DES-3326 Layer 3 Fast Ethernet Switch User's Guide
Figure 7-25. Setup IP Interface window
To setup an new IP interface, click the New icon:
Figure 7-26. Setup IP Interface – Add window
To edit an existing IP interface, click on the Hand icon:
Figure 7-27. Setup IP Interface – Edit window
Choose a name for the interface to be added and enter it in the Interface Name field (if you are editing
an IP Interface, the Name will already be in the top field as seen in the window above). Enter the
interface's IP address and subnet mask in the corresponding fields. Pull the Active pull-down menu to
Yes and click Apply to enter to make the IP interface effective. Use the Save Changes window on the
Maintenance menu to enter the changes into NV-RAM.
214