D-Link DES-3326 User Manual page 212

24-port fast ethernet plus 2-port gigabit module layer 3 switch
Hide thumbs Also See for DES-3326:
Table of Contents

Advertisement

The following field can be set:
Each port can be configured to use the Group Multicast Registration Protocol (GMRP).
To configure the member ports of an 802.1Q VLAN to use GMRP:
Go to the Configuration menu, select VLANs, choose 802.1Q Port Settings, and then click Port
GMRP Settings:
The following field can be set:
Setting Up IP Interfaces
A VLAN that does not have a corresponding IP interface defined for it, will function
as a Layer 2 Only VLAN – regardless of the Switch Operation mode.
Each VLAN must be configured prior to setting up the VLAN's corresponding IP interface.
Parameter
GVRP <Disabled>
Figure 7-24. Port GMRP Settings window
Parameter
GMRP <Disabled>
DES-3326 Layer 3 Fast Ethernet Switch User's Guide
Description
The
Group
VLAN
Protocol (GVRP) enables the port to
dynamically become a member of a
VLAN.
Description
Group
Multicast
Protocol (GMRP) enables the port to
dynamically become a member of a
multicast group.
212
Registration
Registration

Advertisement

Table of Contents
loading

Table of Contents