D-Link DES-3326 User Manual page 179

DES-3326 Layer 3 Fast Ethernet Switch User's Guide
The following fields are displayed:
Area ID
LSDB Type
Adv Router
ID
Link State
ID
Mask
Cost
Sequence
Figure 6-104. Monitor LSDB Table screen
Parameter
Allows the entry of an OSPF Area ID. This Area ID will then be used
to search the table, and display an entry − if there is one.
Displays which one of four types of link advertisements by which the
current link was discovered by the switch: Router link (RTRLink),
Network link (NETLink), Summary link (Summary), Autonomous
System link (ASSummary).
Displays the Advertising Router's ID.
This field identifies the portion of the internet environment that is
being described by the advertisement. The contents of this field
depend on the advertisement's LS type.
LS Type Link State ID
____________________________________________
1 The originating router's Router ID.
2 The IP interface address of the network's Designated Router.
3 The destination network's IP address.
4 The Router ID of the described AS boundary router.
Displays the network mask in hexadecimal format. For example,
255.0.0.0 is displayed as FF000000.
Displays the routing metric associated with the link.
Displays a sequence number corresponding to number of times the
current link has been advertised as changed.
Description
179