D-Link DES-3326 User Manual page 211

DES-3326 Layer 3 Fast Ethernet Switch User's Guide
Go to the Configuration menu, select VLANs, choose 802.1Q Port Settings, and then click Port
Ingress Filter:
The following field can be set:
Each port can be configured to use the Group VLAN Registration Protocol (GVRP).
To configure the member ports of an 802.1Q VLAN to use GVRP:
Go to the Configuration menu, select VLANs, choose 802.1Q Port Settings, and then click Port GVRP
Settings:
Figure 7-22. Port Ingress Filter window
Parameter
Ingress Filter
<Disable>
Figure 7-23. Port GVRP Settings window
Description
This field can be toggled using the
space bar between Enabled and
Disabled. Enabled enables the port
to compare the VID tag of an
incoming packet
number assigned to the port. If the
two are different, the port filters
(drops) the packet. Disabled disables
Ingress filtering.
211
with the PVID