D-Link DES-3326 User Manual page 210

If the port is attached to a device that is not IEEE 802.1Q VLAN compliant (VLAN-tag unaware), then
the port should be set to Untagged (no marker in the port's Tag click-box).
If the port is attached to a device that is IEEE 802.1Q VLAN compliant, (VLAN-tag aware), then the port
should be set to Tagged (has a marker in the port's Tag click-box).
Click Apply to make the additions/deletions effective for the current session. To enter the IP Interfaces
into non-volatile RAM, use the Save Changes window on the Maintenance menu.
To configure the member ports of an 802.1Q VLAN:
Go to the Configuration menu, select VLANs, choose 802.1Q Port Settings, and then click Port VLAN
(PVID):
The following field can be set:
Each port can be configured to use an ingress filter.
To configure the member ports of an 802.1Q VLAN to use and ingress filter:
Figure 7-21. Port VLAN ID (PVID) window
Parameter
PVID
DES-3326 Layer 3 Fast Ethernet Switch User's Guide
Description
A Port VLAN Identifier
classification mechanism
associates a port with a specific
VLAN and is used
forwarding decisions for untagged
packets received by the port. For
example, if port #2 is assigned a
PVID of 3, then all untagged packets
received on port #2 will be assigned
to VLAN 3. This number is generally
the same as the VID# number
assigned to the port in the Edit
802.1Q VLANs menu above.
210
is a
that
to make