First Time Connecting To The Switch - D-Link DES-3018 User Manual

DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual

First Time Connecting to the Switch

The Switch supports user-based security that can allow you to prevent unauthorized users from accessing the
Switch or changing its settings. This section tells how to log onto the Switch.
When you first connect to the Switch, you will be presented with the first login screen (shown below).
Copyright(C) 2007 D-Link Corporation. All rights reserved.
UserName:
Press Enter in both the Username and Password fields. You will be given access to the command prompt
DES-3026:4#, as shown below:
There is no initial username or password. Leave the Username and Password fields blank.
Copyright(C) 2007 D-Link Corporation. All rights reserved.
UserName:
PassWord:
DES-3026:4#_
NOTE: The passwords used to access the Switch are case-sensitive;
therefore, "S" is not the same as "s."
NOTE: Press Ctrl+R to refresh the screen. This command can be used at
any time to force the console program in the Switch to refresh the console
screen.
DES-3026 Fast Ethernet Switch Command Line Interface
Firmware: Build 4.20.B27
Figure 4- 2. Initial screen, first time connecting to the Switch
DES-3026 Fast Ethernet Switch Command Line Interface
Firmware: Build 4.20.B27
Figure 4- 3. Command Prompt
NOTE: The first user automatically gets Administrator level privileges. It is
recommended to create at least one Admin-level user account for the Switch.
17