Snmp Trap Settings; Snmp User Table - D-Link DES-3018 User Manual

DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual

SNMP Trap Settings

The following window is used to enable and disable trap settings for the SNMP function on the Switch. To
view this window, click Administration > SNMP Manager > SNMP Trap Settings
Figure 6- 20. SNMP Trap Settings window
To enable or disable the Traps State and/or the Authenticate Traps State, use the corresponding pull-down
menu to change and click Apply.

SNMP User Table

The SNMP User Table displays all of the currently configured SNMP Users on the Switch.
To view this window, click Administration > SNMP Manager > SNMP User Table
Figure 6- 21. SNMP User Table
To delete an existing SNMP User Table entry, click the below the Delete heading corresponding to the
entry you wish to delete.
To display the detailed entry for a given user, click on the hyperlinked User Name. This will open the
SNMP User Table Display page, as shown below.
Figure 6- 22. SNMP User Table Display
The following parameters are displayed:
Parameter Description
User Name An alphanumeric string of up to 32 characters. This is used to identify the SNMP users.
47