Topology - D-Link DES-3018 User Manual

DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual
Holdtime
Click Apply to implement the settings changed.
After enabling the Switch to be a Commander Switch (CS), the Single IP Management folder will then
contain three added links to aid the user in configuring SIM through the web, including Topology,
Firmware Upgrade and Configuration Backup/Restore.

Topology

The Topology window will be used to configure and manage the Switch within the SIM group and requires
Java script to function properly on your computer.
The Java Runtime Environment on your server should initiate and lead you to the topology window, as seen
below.
The Tree View window holds the following information under the Data tab:
Parameter
Device Name
Local Port
This parameter may be set for the time, in seconds the Switch will hold information sent to it
from other switches, utilizing the Discovery Interval. The user may set the hold time from
100 to 255 seconds.
Figure 6- 37. Single IP Management window - Tree View
Description
This field will display the Device Name of the switches in the SIM group configured by the
user. If no Device Name is configured by the name, it will be given the name default and
tagged with the last six digits of the MAC Address to identify it.
Displays the number of the physical port on the CS that the MS or CaS is connected to. The
CS will have no entry in this field.
61