Dhcp Relay Option 60 Settings - D-Link DES-3018 User Manual

DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual

DHCP Relay Option 60 Settings

This window allows the user to choose whether DHCP relay will process the DHCP option or not. When
Option 60 is enabled, if the packet doesn't already have option 60 then the relay servers cannot be
determined based on option 60. The relay servers will be determined based on either option 61 or IPIF
configured servers. If the relay servers are determined based on option 60 or option 61 then the IPIF
configured servers will be ignored. If the relay servers are not determined by option 60 or option 61, then the
IPIF will be used to determine the relay servers.
To view this window, click Administration > DHCP/BOOTP Relay > DHCP Relay Option 60 Settings
To find an entry, enter the String or IP address and click Search, to view all entries click ViewAll to delete
an entry click Delete.
To add a new entry click Add, the following window will appear for the user to configure.
The following parameters may be configured.
Parameter
String
Server IP
Match Type
Click Apply to implement changes made. To return to the DHCP Relay Option 60 Table, click the
DHCP Relay Option 60 Table
Figure 6- 66. DHCP Relay Option 60 Settings window
Figure 6- 67. DHCP Relay Option 60 Settings window - Add
Description
Enter a string for the new entry up to a maximum of 255 characters.
Enter a Server IP address.
Use the drop down menu to choose Exact Match or Partial Match.
link.
82
Show