Page 12
Before using for the first time, remove all packaging and any labels, including plastic blade covers. Wash the parts: see ‘Cleaning’. If the plug or cord is damaged it must, for safety reasons, be replaced by Kenwood or an authorised Kenwood repairer in order to avoid a hazard.
Page 13
If the plug supplied with your appliance has a fuse fitted and the fuse fails it must be replaced with one of the same rating. If the plug or cord requires replacing a new cord set should be fitted by an Authorised Kenwood Repairer.
The correct fuse cover is identified by colour and a replacement may be obtained from your Kenwood Authorised Repairer (see Service). If a non-rewireable plug is cut off it must be DESTROYED IMMEDIATELY. An electric shock hazard may arise if an unwanted non-rewireable plug is inadvertently inserted into a socket outlet.
Page 15
Fit the assembled tool over the drive shaft. Citrus Juicer To Use Your Fit the lid - ensuring the top of the drive (if supplied) shaft/tool locates into the centre of the lid. Plug in, switch on and select a speed. (Refer Refer to Illustrations to the Recommended usage chart IMPORTANT...
Thick mixtures, e.g. pâtés and dips, may need To Use Your Mini Chopper/Mill scraping down. If the mixture is difficult to (if supplied) process, add more liquid. Refer to Illustrations The processing of spices is not recommended as they may damage the plastic parts. Put the ingredients into the jar.
Recipe Prune Marinade 275g Honey (refrigerated) 25g Prunes 50ml Water Place all ingredients into the mini chopper/ mill. Fit the attachment to the power unit. Switch to pulse for 5 seconds Use as required. Care and Cleaning Always switch off and unplug before cleaning. Handle the blade and cutting discs with care - they are extremely sharp.
If your Kenwood product malfunctions or you find any defects, please send it or bring it to an authorised KENWOOD Service Centre. To find up to date details of your nearest authorised KENWOOD Service centre visit www.kenwoodworld.com or the website specific to your Country.
Troubleshooting Guide Problem Cause Solution The processor will not No Power. Check processor is plugged in. operate. Bowl not fitted to power Check bowl is located correctly and the unit correctly. handle is situated towards the right front hand corner. Bowl lid not locked on Check that the lid interlock is located correctly.
Need help?
Do you have a question about the FDP31.020WH and is the answer not in the manual?
Questions and answers
how do I take the bowl off my new food processor. I took it back to the shop and they could not work it out either.