Nauticam N85 Macro Port 56 with Focus Knob Instruction Manual

Instruction Manual for N85 Macro Port 56
with Focus Knob
F
OREWORD
Thank you for your purchase of a NAUTICAM product.
At NAUTICAM, we pride ourselves in the ability to recognize the
requirements of professional as well as amateur underwater photographers
and fulfill them through the innovative designs of our products. We strive
to achieve a high level of user-friendliness by allowing stress-free
installation and easy operation of all important functions of the camera.
Each product is individually inspected and water pressure tested to ensure
optimum quality.
Please read this manual carefully before using the product, this will
maximise its performance as well as its lifetime.
W
ARRANTY
All NAUTICAM Products are warranted against any material and
manufacturing defects for two years from the date of purchase for
consumer use. This warranty only applies to products purchased from
authorised NAUTICAM dealers and does not extend beyond the original
retail purchaser.
To return your product for service, please contact your regional authorized
service centre(s). Please note that this warranty only applies when the
product is purchased in the territory where the service centre is located.
NAUTICAM does not hold responsibility for damage, of any nature, to any
equipment used with and/or placed within our products.
NAUTICAM accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning of our
products.
Unauthorised modifications and/or repairs of our products will
automatically invalidate the warranty.
P C
ACKAGE ONTENTS

Macro Port 56 with Focus Knob

Plastic Port Cap

Rear Port Cap

Spare O-ring and Lubricant

Manual Notice Card

Port Pouch
I P
DENTIFICATION OF ARTS
Focus knob
Port alignment dot
PN# 36166
Plastic port cap
Macro Port 56
Rear port cap
M P
OUNTING THE ORT
Remove the O-ring from the port, inspect for any damage and lightly coat it
with the provided lubricant before placing it back into its groove.
Verify that the port opening of the housing is clean and free from foreign
material.
Push the safety button of the port locking lever downwards.
Turn the port locking lever to the release position as shown.
Lift housing cap.