Advertisement
Quick Links
Advertisement
Related Manuals for Cozzia Qi XE Pro
Summary of Contents for Cozzia Qi XE Pro
- Page 1 CZ-716/Qi XE PRO /MANUEL D'INSTALLATION...
- Page 2 Assembly Instructions/Instructions de montage CZ-716 Massage chair arrives in 3 boxes. Le fauteuil de massage CZ-716 est livré en 3 boîte. Open box 1 and remove all contents. Remove the packing materials. Take the chair out of the box. Collect all the accessories and put them aside.
- Page 3 Adjust chair position. Use the power cord to connect the chair to the power supply and turn on the power Remove cotter pins and bolts from chair base. Locate the two cotter pins and bolts on the chair base. switch. The chair will go back to home position. Then disconnect the power cord. Take them off...
- Page 4 Connect wires in footrest. Connect both footrest wire connectors and screw the caps tight. Then connect the Open box 2 with side boards. Take out the side boards. Detach the cover from the side board. air hose. Ouvrez la deuxième boîte contenant les panneaux latéraux. Retirez les planches latérales. Détachez le Caution: After the wire connectors have been connected the cap must be screwed tight.
- Page 5 Attach the right side board cont. Move the right side board close to the chair. Route the air hose and wire through the hole of the side board. Then fix the side board with screw nut and washer. Attachez le panneau latéral droit. Déplacez le panneau latéral droit près du fauteuil. Faites passer le tuyau d'air et le fil à...
- Page 6 Assemble the decoration strip. First, attach the decoration strip. Then fix it with six cross recessed pan head Attach the speaker covers. These are also attached by snap joints. Attach the side covers first, then the decoration screws. strip on the top. Assemblez la bande décorative.
- Page 7 Attach the remote control holder. Remove the screw first, then fix the remote control holder onto the armrest. Attach the backrest pad to the backrest. Connect the heater wire connectors by connecting the black connector Secure it with the screw nut. Then attach the touch-pad on to the holder. with the black connector, and the white connector with the white connector.
- Page 8 Attach the seat pad. Zip the three zippers to fix the seat pad onto the base. Then zip the zipper between seat pad Turn on the chair. Connect the chair to a power supply and turn on the power switch. The chair will now and footrest cushion.
Need help?
Do you have a question about the Qi XE Pro and is the answer not in the manual?
Questions and answers