Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Cozzia EC-360D
Summary of Contents for Cozzia EC-360D
- Page 1 EC-360D Maintenance Service Manual MODEL: EC-360D By Customer Service Department...
- Page 2 Contents 1. Precautions for inspection and repair 2. Error codes and Description 3. Tools list 4. Replacing of the backrest pad 5. Replacing of the fabric of the backrest 6. Replacing Backrest Assembly. 7. Replacing detach front cover of backrest & rear cover of backrest 8.
- Page 3 1. Precautions for inspection and repair Inspection Verify that the power cord is tightly connected on the machine. Be careful to avoid electric shock. Repair Power off the supply before repair work begins. Keep things tidy and in order during repair work. ...
- Page 4 2. Error Codes and description 2.1 Error Message will be displayed when Malfunction ON/OFF: KNEAD + TAP + POWER(buttons on the controler), press and hold the three buttons in two senconds to turn on the automatic analysis system model. After activating the "auto-checking model", the display screen of the controller keeps flashing; if there is something wrong with the chair, the time area will show you the exact code of the malfunction, meanwhile the buffer will make noise.
- Page 5 1.wideth inspection board is broken 1.change wideth inspection more than 5 seconds 2.the wire connect to the board activate did not tested the wideth inspection board is 2.change backrest auto-check model narrow signal disconnected wires.(black and gray) 3.kneading motor is broken or 3.change kneading motor kneading belt is lost when not kneading but...
- Page 6 1.change backrest recline 1.backrest recline actuator is actuator when start the broken 2.check whether the backrest recline 2.backrest recline actuator backrest recline actuator activate actuator, there is no wire is disconnected motor wire is well auto-check model counting signal for 3.the signal wire of the connected.
- Page 7 5：Replacing of the fabric of the backrest A：Unzip the zipper and separate the back pad from the backrest. B：Find the two zippers at the bottom of the front back. Unzip these two zippers, then we can take the fabric off. 6：Replacing Backrest Assembly.
- Page 8 Disassembly Flat head rivet and Split pin C：Disconnect the two backrest wires (one is gray, one is black ) . Note different color Wire Terminals and mark (Insert the wire plugs back black to black and gray to gray, otherwise damage to the chair may result) Backrest wire connecters D：Pull the backrest vertically, then the backrest can be take off.
Need help?
Do you have a question about the EC-360D and is the answer not in the manual?
Questions and answers