Use The [Bank] Key / Pads 1-8 To Specify A Pad; Use Pads 1-8 To Select A Pad Track - Yamaha AW4416 Supplement Manual

Additions and changes in version 1.2, 1.3
Use the [BANK] key / pads 1–8 to specify a pad
When using the SAMP. PAD screen to edit the sampling pads, you can now use
the [BANK] key and pads 1–8 to specify the bank/pad.
In each page of the SAMP. PAD screen when a parameter requiring you to specify
a bank or pad number is selected and the cursor is at the parameter setting field,
you can use the [BANK] key and pads 1–8 to directly specify the bank (A/B) and
pad number (1–8).
Refer to: SAMP. PAD screen
Use pads 1–8 to select a pad track
You can now use pads 1–8 to directly turn on/off the recording button for the cor-
responding pad track (a track used to record/play pad trigger events).
To do this, access the SAMP. PAD screen Trig. List page, and move the cursor to
one of the R (recording) buttons. In this state, you can press a pad 1–8 to turn the
recording button on/off for the corresponding pad track.
You can also use pads 1–8 to switch muting on/off for a pad track. To do this
move the cursor to one of the M (mute) buttons in the Trig. List page, and press a
pad 1–8 to turn muting on/off for the corresponding pad track.
Refer to: Pad Track (Trig. List page)
16
Reference Guide p.80
Reference Guide p.88