Yamaha AW4416 Supplement Manual page 8

Additions and changes in version 1.2, 1.3
7. Move the cursor to the TO DRIVE parameter, and press the [ENTER] key.
The following display will appear.
1 DRIVE field
Select the internal CD-RW drive or an external SCSI device.
B FROM
If you selected the TRACK/PART menu in step 4, the track number (TR field), vir-
tual track number (V field), and track name (NAME field) will be displayed. If you
selected the REGION menu, the region name will be displayed.
If you selected the PART/REGION menu in step 4, the selected region of audio
will be displayed below these display fields.
Tip
By setting "CD BACKUP/WAV-EXP MODE" in the UTILITY screen Prefer.3 page,
you can test whether an error will occur while writing data, and whether the data
was written correctly. For details refer to Reference Guide p.37. (The setting that was
named "CD BACKUP MODE" in version 1.0 has been changed to "CD BACKUP/
WAV-EXP MODE" in version 1.2.)
8. Move the cursor to the DRIVE area, use the [DATA/JOG] dial to select the SCSI
ID of the drive, and press the [ENTER] key.
If media (e.g., a MO disk) is inserted, it will be detected automatically. If a WAV
file already exists on the inserted media, the following display will appear.
Tip
• "
• If you selected a hard disk that has been divided into partitions, you will be
8
1
" indicates the current directory, and "
directory. To return to the next higher directory, move the cursor to "
and press the [ENTER] key.
able to switch between partitions in the PART field.
2
" indicates the next higher
"