Joining Regions Within A Track - Yamaha AW4416 Supplement Manual

Additions and changes in version 1.2, 1.3
Hide thumbs Also See for AW4416:
Table of Contents

Advertisement

Joining regions within a track

In the TR Edit page you can use the APPEND command to join regions within a
track as follows.
1. Press the RECORDER section [EDIT] key
The EDIT screen TR Edit page will appear.
2. If you wish to join the regions of the entire track, move the cursor to the
TRACK menu and press the [ENTER] key. If you wish to join only the regions
within the selected area (part), move the cursor to the PART menu and press
the [ENTER] key.
3. Move the cursor to the APPEND command button, and press the [ENTER] key.
4. According to the menu that you selected in step 2, move the cursor to one of
the following parameter buttons and press the [ENTER] key.
If you selected the TRACK menu
• TRACK
Select the track whose regions you wish to join.
If you selected the PART menu
• TRACK
Select the track whose regions you wish to join.
• START
Specify the starting location of the regions that you wish to join.
• END
Specify the ending location of the regions that you wish to join.
Tip
When setting the TRACK parameter in the TRACK menu, you can use the REC
TRACK SELECT [1]–[16] keys to directly select the track number.
5. Use the [DATA/JOG] dial to edit the setting, and press the [ENTER] key.
Additions and changes in version 1.2, 1.3
[F1] (TR Edit) key.
11

Advertisement

Table of Contents
loading

Table of Contents