ViewSonic VS20032 User Manual
  1. Manuals
  2. Brands
  3. ViewSonic Manuals
  4. Projector
  5. VS20032
  6. User manual

ViewSonic VS20032 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
LS901HD
LS901-4K
Projector
User Guide
IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in
a safe manner, as well as registering your product for future service. Warranty information contained in this User
Guide will describe your limited coverage from ViewSonic® Corporation, which is also found on our web site at
http://www.viewsonic.com in English, or in specific languages using the Regional selection box on our website.
Model No. VS20032 | VS20033
P/N: LS901HD | LS901-4K

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VS20032 and is the answer not in the manual?

Questions and answers

Related Manuals for ViewSonic VS20032

Summary of Contents for ViewSonic VS20032

  • Page 1 Warranty information contained in this User Guide will describe your limited coverage from ViewSonic® Corporation, which is also found on our web site at http://www.viewsonic.com in English, or in specific languages using the Regional selection box on our website.
  • Page 2 At ViewSonic®, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic® product you have chosen will serve you well.

  • Page 3: Safety Precautions

    Safety Precautions following Safety Precautions before you start using the projector. Please read the • Keep this user guide in a safe place for later reference. • Read all warnings and follow all instructions. • Allow at least 20“ (50 cm) clearance around the projector to ensure proper ventilation.
  • Page 4 (UPS). • If smoke, an abnormal noise, or a strange odor is present, immediately switch the projector off and call your dealer or ViewSonic®. It is dangerous to continue using the projector. • Use only attachments/accessories specified by the manufacturer.
  • Page 5 Safety Precautions - Ceiling Mounting Please read the following Safety Precautions before you start using the projector. If you intend to mount the projector on the ceiling, it is strongly recommended that you use a proper fitting projector ceiling mount kit and that you ensure it is securely and safely installed.
  • Page 6 Laser Caution This product belongs to CLASS I laser product and complies with IEC 60825-1:2014, EN 60825-1:2014/A11:2021, EN 50689:2021. CLASS 1 CONSUMER LASER PRODUCT EN50689:2021. IEC 60825-1:2014, EN 60825 1 2014 A11 2021, EN 50689:2021 CLASS 1 CONSUMER LASER PRODUCT RISK GROUP 2, Complies with 21 CFR 1040.10 and 1040.11 except for conformance as a Risk Group 2 LIP as defined in IEC 62471-5:Ed.1.0.

  • Page 7: Table Of Contents

    Contents Safety Precautions ............3 Introduction .............. 10 Package Contents ....................10 LS901HD ........................ 10 LS901-4K ........................ 11 Product Overview ....................12 Projector ........................ 12 Keypad ........................13 Indicator Lights ...................... 13 I/O Ports ........................ 14 Remote Control ..................... 16 Initial Setup ............... 20 Choosing a Location - Projection Orientation ............20 Projection Dimensions ..................21 LS901HD ........................
  • Page 8 Menu Operation ............36 On-Screen Display (OSD) Menu ................36 Menu Navigation ....................37 On-Screen Display (OSD) Menu Tree ..............38 LS901HD ........................ 38 LS901-4K ........................ 46 Menu Options .......................53 Display Menu......................53 Audio Menu ......................60 Setup Menu ......................61 Network Menu ...................... 64 Information Menu ....................
  • Page 9 Regulatory and Service Information ......79 Compliance Information ..................79 FCC Compliance Statement ................... 79 Industry Canada Statement ................... 79 CE Conformity for European Countries ..............80 Declaration of RoHS2 Compliance................. 81 Indian Restriction of Hazardous Substances ............82 Product Disposal at End of Product Life ..............82 Copyright Information ..................83 Customer Service ....................

  • Page 10: Introduction

    Introduction Package Contents LS901HD Number Description Projector Remote Control Batteries Quick Start Guide Power Cord NOTE:  The power cord and remote control included in your package may vary depending on your country. Please contact your local reseller for more information.

  • Page 11: Ls901-4K

    LS901-4K Number Description Projector Remote Control Batteries Quick Start Guide Power Cord NOTE:  The power cord and remote control included in your package may vary depending on your country. Please contact your local reseller for more information.

  • Page 12: Product Overview

    Product Overview Projector Number Description Remote IR Sensor Keypad Lens Shift Focus Ring Vent (inlet) Zoom Ring Vent (outlet) Security Bar Adjuster Foot Projection Lens NOTE:  Do not block projector intake and exhaust vents.

  • Page 13: Keypad

    Keypad SOURCE ENTER AUTO MENU EXIT Description OURCE ENTER AUTO Toggles the projector between standby mode and Power Power On. MENU Manually corrects distorted images resulting from an Keystone EXIT angled projection. SOURCE ENTER AUTO Selects the desired menu items and makes SOURCE ENTER AUTO...

  • Page 14: I/O Ports

    I/O Ports LS901HD HDMI 2 HDMI 1 USB A 5V/1.5A HDCP 2.2 (Service) AUDIO OUT RS232 CONTROL Port Description HDMI 2 HDMI port. HDMI 1 HDMI port. USB A 5V/1.5A (Service) USB Type A port for power and service. Control LAN port.
  • Page 15 LS901-4K HDMI 2 HDMI 1 USB A 5V/1.5A HDCP 2.3 HDCP 2.3 (Service) AUDIO OUT RS232 CONTROL Port Description HDMI 2 HDMI port. HDMI 1 HDMI port. USB A 5V/1.5A (Service) USB Type A port for power and service. Control LAN port.

  • Page 16: Remote Control

    Remote Control Button Description AV Mute Hides the screen picture and volume mute. Power Turns the projector On or Off Automatically determines the best picture timings for Auto Sync the displayed image. Source Displays the input source selection bar. Navigation Navigates and selects the desired menu items and Buttons make adjustments.
  • Page 17 Button Description Keystone Manually correct distorted images. Volume Decrease the volume level. Down Video Unsupported Button Unsupported Button HDMI Selects the HDMI 1 or HDMI 2 input source. Aspect Displays the aspect ratio selection bar. Page Up Unsupported Button Zoom In Increases the projected image size.
  • Page 18 Remote Control - Receiver Range To ensure proper function of the remote control follow the steps below: 1. The remote control must be held at an angle within 30° perpendicular to the projector’s IR remote control sensor(s). 2. The distance between the remote control and the sensor(s) should not exceed 8 m (26 ft).
  • Page 19 Remote Control - Replacing the Batteries 1. Remove the battery cover from the bottom of the remote control by pressing the finger grip and sliding it across. 2. Remove any existing batteries (if necessary) and install two AAA batteries. NOTE:  Observe the battery’s polarities as indicated. 3.

  • Page 20: Initial Setup

    Initial Setup Choosing a Location - Projection Orientation Personal preference and room layout will decide the installation location. Consider the following: • Size and position of your screen. • Location of a suitable power outlet. • Location and distance between the projector and other equipment. The projector is designed to be installed in one of the following locations: Location Front...

  • Page 21: Projection Dimensions

    Projection Dimensions LS901HD 16:9 Image on a 16:9 Screen NOTE:  (e) = Screen / (f) = Center of Lens (b) Projection Distance (d) Vertical Offset (c) Image (a) Screen Size Height Minimum Maximum Minimum Maximum 31.38 53.35 1355 14.71 0.88 3.97 1016 41.85...
  • Page 22 16:9 Image on a 4:3 Screen NOTE:  (e) = Screen / (f) = Center of Lens (b) Projection Distance (d) Vertical Offset (c) Image (a) Screen Size Height Minimum Maximum Minimum Maximum 28.80 48.96 1244 13.50 0.81 3.65 1016 38.40 65.28 1658 18.00...

  • Page 23: Projection Dimensions

    Projection Dimensions LS901-4K 16:9 Image on a 16:9 Screen NOTE:  (e) = Screen / (f) = Center of Lens (b) Projection Distance (d) Vertical Offset (c) Image (a) Screen Size Height Minimum Maximum Minimum Maximum 31.38 53.35 1355 14.71 0.88 3.97 1016 41.85...
  • Page 24 16:9 Image on a 4:3 Screen NOTE:  (e) = Screen / (f) = Center of Lens (b) Projection Distance (d) Vertical Offset (c) Image (a) Screen Size Height Minimum Maximum Minimum Maximum 28.80 48.96 1244 13.50 0.81 3.65 1016 38.40 65.28 1658 18.00...

  • Page 25: Mounting The Projector

    NOTE:  If you buy a third party mount, please use the correct screw size. Screw size can vary depending on the thickness of the mounting plate. 1. To ensure the most secure installation, please use a ViewSonic® wall or ceiling mount.

  • Page 26: Making Connections

    Making Connections Connecting to Power 1. Connect the power cord to the AC IN jack at the rear of the projector. 2. Plug the power cord into a power outlet. NOTE:  When installing the projector, incorporate a readily accessible disconnect device in the fixed wiring, or connect the power plug to an easily accessible outlet near the unit.

  • Page 27: Connecting To External Devices

    Connecting to External Devices HDMI Connection Connect one end of an HDMI cable to the HDMI port of your video device. Then connect the other end of the cable to the HDMI 1 or HDMI 2 port of your projector. NOTE: ...

  • Page 28: Audio Connection

    Audio Connection You can connect to various external sound delivery devices via the Audio Out port.

  • Page 29: Usb And Network Connection

    USB and Network Connection USB Type A Connection The USB port is for supplying power and service needs. Network Connection Plug the network cable into the LAN port. HDMI 1 USB A 5V/1.5A HDCP 2.3 (SERVICE) CONTROL...

  • Page 30: Rs-232 Connection

    RS-232 Connection When you use a RS-232 serial port cable to connect the projector to an external computer certain functions can be controlled remotely by the PC, including Power On/Off, Volume adjustment, Input select, Brightness, and more. RS232...

  • Page 31: Using The Projector

    Using the Projector Turning the Projector On 1. Make sure the projector’s power cord is properly connected to a power outlet. 2. Press the Power button on the projector or remote control to turn on the projector. NOTE:  • The Power Indicator Light will be flashing blue during startup. •...

  • Page 32: Selecting An Input Source

    Selecting an Input Source The projector can be connected to multiple devices at the same time. However, it can only display one full screen at a time. When Auto Source is on, the projector will automatically search for input sources. If multiple sources are connected, press the Source button on the projector or remote control to select the desired input.

  • Page 33: Adjusting The Projected Image

    Adjusting the Projected Image Adjusting the Projector’s Height and Projection Angle The projector is equipped with three adjustment feet. Adjusting the feet will change the projector’s height and the vertical projection angle. Adjustment Feet Tilt-Adjustment Ring...

  • Page 34: Adjusting The Focus, Keystone, And Lens Shift

    Adjusting the Focus, Keystone, and Lens Shift You can improve and adjust the clarity and position of the image by adjusting the Focus Ring, Keystone Keys, Lens Shift dial, or Zoom Ring.

  • Page 35: Turning The Projector Off

    Turning the Projector Off 1. Press the Power button on the projector or remote control and a “power off message” will appear. 2. Press the Power button again to confirm and shut down the projector. 3. The Power Indicator Light will turn solid red and enter standby mode.

  • Page 36: Menu Operation

    Menu Operation On-Screen Display (OSD) Menu The projector has multilingual on-screen display menus that allow you to make image adjustments and change a variety of settings. Display Image Settings 3x Fast Input Aspect Ratio Zoom Image Shift Keystone Select Exit Enter Menu Description...

  • Page 37: Menu Navigation

    Menu Navigation The projector has multilingual on-screen display menus that allow for image and settings adjustment. 1. To open the On-Screen Display (OSD) Menu, press the Menu/Exit button on the projector or the remote control. 2. When the OSD is displayed, use the Navigation buttons ( ) to select any item in the main menu.

  • Page 38: On-Screen Display (Osd) Menu Tree

    On-Screen Display (OSD) Menu Tree LS901HD Main Menu Sub-menu Menu Option Presentation Brightest HDR SIM. Movie Color Mode Game sRGB DICOM SIM. Golf Brightness (-/+, -50~50)/1 Contrast (-/+, -50~50)/1 Display Image Settings Sharpness (-/+, 1~15)/1 Color (-/+, -50~50)/1 Tint (-/+, -50~50)/1 Cube Gamma 2.35...
  • Page 39 Main Menu Sub-menu Menu Option Brilliant (-/+, 1~10)/1 Color™ Warm Standard Color Temperature Cool Cold Green Blue Color Cyan Yellow Magenta Color Management White Display Image Settings Color Settings Hue/R (-/+, -50~50)/1 Saturation/G (-/+, -50~50)/1 Gain/B (-/+, -50~50)/1 Reset Exit Red Gain (-/+, -50~50)/1 Green Gain...
  • Page 40 Main Menu Sub-menu Menu Option Auto RGB (0~255) Color Settings Color Space RGB (16~235) Dynamic Black Image Settings Light Source Light Source Mode Power 100%~50% Reset 3x Fast Input 3D Mode DLP-Link Auto Top and 3D Format Bottom Frame Display Sequential 3D Sync Invert 16:9...
  • Page 41 Main Menu Sub-menu Menu Option Mute Audio Volume (-/+, 0~10)/1 Front Rear Projection Ceiling-Top Rear-Top Direct Power Signal Power Setup Power Settings Auto Power (-/+, 0~180)/5 Off (min.) minutes Power Mode Active (Standby) ErP Off Power On Lock Security Change Password...
  • Page 42 Main Menu Sub-menu Menu Option HDMI CEC HDMI CEC Green Grid Magenta Grid Test Pattern Test Pattern White Grid White Test Card English Deutsch Français Italiano Español Português Polski Nederlands Svenska Norsk/Dansk Setup Suomi ελληνικά 繁體中文 簡体中文 Options Language 日本語 한국어...
  • Page 43 Main Menu Sub-menu Menu Option Auto Source Options High Altitude Setup Default Logo Neutral Reset to Reset Default...
  • Page 44 Main Menu Sub-menu Menu Option Network Status MAC Address DHCP IP Address xxx.xxx.xxx Subnet Mask xxx.xxx.xxx Gateway xxx.xxx.xxx xxx.xxx.xxx Reset Crestron Network Extron PJ Link Control AMX Device Discovery Telnet HTTP...
  • Page 45 Main Menu Sub-menu Menu Option Serial Number Source Resolution Refresh Rate Color Mode Power Mode (Standby) Light Source Information Hours Network Status IP Address Light Source Mode System FW Version...

  • Page 46: Ls901-4K

    LS901-4K Main Menu Sub-menu Menu Option Presentation Brightest Color Mode Movie Game sRGB Golf Brightness (-/+, -50~50)/1 Contrast (-/+, -50~50)/1 Display Image Settings Sharpness (-/+, 1~15)/1 Color (-/+, -50~50)/1 Tint (-/+, -50~50)/1 Cube Gamma 2.35 sRGB Film...
  • Page 47 Main Menu Sub-menu Menu Option Brilliant (-/+, 1~10)/1 Color™ Warm Standard Color Temperature Cool Cold Green Blue Display Image Settings Color Settings Color Cyan Yellow Magenta Color Management White Hue/R (-/+, -50~50)/1 Saturation/G (-/+, -50~50)/1 Gain/B (-/+, -50~50)/1 Reset Exit...
  • Page 48 Main Menu Sub-menu Menu Option Auto RGB (0~255) Color Settings Color Space RGB (16~235) Dynamic Black Image Settings Light Source Light Source Mode Power 100%~50% Reset Active Ultra Fast Input Inactive 3D Mode Auto Top and 3D Format Bottom Display Frame Sequential 3D Sync Invert...
  • Page 49 Main Menu Sub-menu Menu Option Mute Audio Volume (-/+, 0~10)/1 Front Rear Projection Ceiling-Top Rear-Top Direct Power Signal Power Setup Power Settings Auto Power (-/+, 0~180)/5 Off (min.) minutes Power Mode Active (Standby) ErP Off Power On Lock Security Change Password...
  • Page 50 Main Menu Sub-menu Menu Option HDMI CEC HDMI CEC Green Grid Magenta Grid Test Pattern Test Pattern White Grid White Test Card English Deutsch Français Italiano Español Português Polski Nederlands Svenska Norsk/Dansk Setup Suomi ελληνικά 繁體中文 簡体中文 Options Language 日本語 한국어...
  • Page 51 Main Menu Sub-menu Menu Option Auto Source Options High Altitude Setup Default Logo Neutral Reset to Reset Default Network Status MAC Address DHCP IP Address xxx.xxx.xxx Subnet Mask xxx.xxx.xxx Gateway xxx.xxx.xxx xxx.xxx.xxx Reset Crestron Network Extron PJ Link Control AMX Device Discovery Telnet HTTP...
  • Page 52 Main Menu Sub-menu Menu Option Serial Number Source Resolution Refresh Rate Color Mode Power Mode (Standby) Light Source Information Hours Network Status IP Address Light Source Mode System FW Version...

  • Page 53: Menu Options

    Menu Options Display Menu Display Image Settings 3x Fast Input Aspect Ratio Zoom Image Shift Keystone Select Exit Enter...
  • Page 54 Menu Description Color Mode There are several predefined display modes that you can choose from to suit your viewing preference. Mode Description Suitable for most presenting needs for Presentation business and education environments. Brightest Suitable for bright, well-lit environments. Decodes and displays High Dynamic Range (HDR) content for the deepest blacks, brightest whites, and vivid HDR SIM.
  • Page 55 Menu Description Brightness The higher the value, the brighter the image. Lower values will result in a darker image. Contrast Use this to set the peak white level after you have previously adjusted the Brightness setting to suit your selected input and viewing environment.
  • Page 56 Menu Description Color Settings Setting Description A color-processing algorithm and enhancements to enable higher Brilliant Color™ brightness while providing true, more vibrant colors in picture. Select from Warm, Standard, Cool, Color Temperature or Cold. Only in permanent installations with controlled lighting levels such as: boardrooms, lecture halls, or home theaters should Color Matching be considered.
  • Page 57 Menu Description 3x Fast Input /Ultra Fast This function is favorable to frame rate reducing. Input 3D Mode Enable or disable the 3D function. 3D Format Select the 3D content format. NOTE: A Blu-ray 3D source will be detected automatically, and options will not be selectable. Option Description When a 3D identification signal is...
  • Page 58 Menu Description Select the aspect ratio of the projected image. Aspect Ratio Description Scales an image so that it is displayed in the center of the screen with a 4:3 aspect ratio. This is most suitable for 4:3 images like computer monitors, standard definition TV, and 4:3 aspect DVD movies, as it displays them without aspect alteration.
  • Page 59 Menu Description Option Description Adjust each corner to make a square image when the projection surface is not level. NOTE: While adjusting the Four Corners, the Aspect Four Corners Ratio, Edge Mask, Image Shift, and Zoom menus will be disabled. To enable them, reset the Keystone settings to Keystone...

  • Page 60: Audio Menu

    Audio Menu Audio Mute Volume Select Exit Enter Menu Description Mute Temporarily turn off the sound. Volume Adjust the volume level.

  • Page 61: Setup Menu

    Setup Menu Setup Projection Power Settings Security HDMI CEC Test Pattern Options Reset Select Exit Enter Menu Description Select the preferred projection: Front, Rear, Ceiling-Top, and Projection Rear-Top. Direct Power On Automatically power on the projector when AC power is supplied, without pressing the Power button on the projector or the remote control.
  • Page 62 Menu Description Power Mode (Standby) NOTE: • There is no USB power supply when the projector is in standby mode. • If you wish to connect to the projector via LAN in its standby mode, be sure you have selected “Erp Off”.
  • Page 63 Menu Description When you connect HDMI CEC-compatible devices to the projector with HDMI cables, you can control them on the same power on or power off status using the HDMI CEC control feature in the projector’s OSD. This lets one device or multiple devices in a group power on or power off via HDMI CEC in a typical configuration.

  • Page 64: Network Menu

    Network Menu Network Control Select Exit Enter Menu Description View network information and enable/disable DHCP. Enable or disable network control suites. NOTE: To connect successfully, the control suite must be enabled. Network Control Crestron Control Extron PJ Link AMX Device Discovery Telnet HTTP Select...
  • Page 65 Controlling the Projector through a Network The projector provides diverse networking and remote management features. The LAN /RJ45 function of the projector, through a network, can remotely manage: Power On/Off, Volume adjustment, Input select, Brightness, and more. NOTE:  Please ensure Network > Control > HTTP is enabled. 1.

  • Page 66: Information Menu

    Information Menu View Serial Number, Source, Resolution, Refresh Rate, Display Mode, Power Mode, Light Source Hours, Network Status, IP Address, Brightness Mode, and Firmware Version information. Information 0000123456789 Serial Number HDMI Source 1080P Resolution 24Hz Refresh Rate None Display Mode Active Power Mode 99999 hr...

  • Page 67: Appendix

    Appendix Specifications Specifications Item Category LS901HD LS901-4K Type Laser Display Size 30”~300” Projector 1.2~2.04 Throw Ratio (100” @ 2.66 m) Display System 1-CHIP DMD : 15~135 kHz, HDMI 1 :23~120 Hz, : 15~255 kHz, Pixel rate: 600 MHz Input Signal :23~240 Hz, : 15~135 kHz, Pixel rate: 600 MHz...

  • Page 68: Projector Dimensions

    Projector Dimensions 337 mm (W) x 132 mm (H) x 280 mm (D) LS901HD LS901-4K...

  • Page 69: Timing Chart

    Timing Chart LS901HD HDMI 1 (v. 2.0) HDMI - PC Signal Timing Resolution Refresh Rate (Hz) 640 x 480 60/67/72/75/120 720 x 400 800 x 600 56/60/72/75/120 SVGA 832 x 624 1024 x 768 60/70/75/120 SXGA 1280 x 1024 60/75 PowerBook G4 1152 x 870 1280 x 720...
  • Page 70 HDMI - 3D Signal Resolution Refresh Rate (Hz) Frame packing 720p 1280 X 720 50/60 1080p 1920 X 1080 Side-by-Side 1080i 1920 X 1080 50/60 Top-and-Bottom 720p 1280 X 720 50/60 1080p 1920 X 1080 NOTE:  • 1080i @ 25 Hz and 720p @ 50 Hz will run in 100 Hz; other 3D timing will run in 120 Hz.
  • Page 71 HDMI 2 (v. 1.4) HDMI - PC Signal Timing Resolution Refresh Rate (Hz) 640 x 480 60/67/72/75/120 720 x 400 800 x 600 56/60/72/75/120 SVGA 832 x 624 1024 x 768 60/70/75/120 SXGA 1280 x 1024 60/75 PowerBook G4 1152 x 870 1280 x 720 WXGA 1280 x 800...
  • Page 72 HDMI - 3D Signal Resolution Refresh Rate (Hz) Frame packing 720p 1280 X 720 50/60 1080p 1920 X 1080 Side-by-Side 1080i 1920 X 1080 50/60 Top-and-Bottom 720p 1280 X 720 50/60 1080p 1920 X 1080 NOTE:  • 1080i @ 25 Hz and 720p @ 50 Hz will run in 100 Hz; other 3D timing will run in 120 Hz.

  • Page 73: Ls901-4K

    LS901-4K HDMI 1 and HDMI 2 (v. 2.0) HDMI - PC Signal Timing Resolution Refresh Rate (Hz) 640 x 480 60/67/72/75 720 x 400 800 x 600 56/60/72/75 SVGA 832 x 624 1024 x 768 60/70/75 1152 x 864 PowerBook G4 1152 x 870 1280 x 720 WXGA...
  • Page 74 HDMI - 3D Signal Resolution Refresh Rate (Hz) Frame packing 720p 1280 X 720 50/60 1080p 1920 X 1080 Side-by-Side 1080i 1920 X 1080 50/60 Top-and-Bottom 720p 1280 X 720 50/60 1080p 1920 X 1080 NOTE:  • 1080i @ 25 Hz and 720p @ 50 Hz will run in 100 Hz; other 3D timing will run in 120 Hz.

  • Page 75: Troubleshooting

    Troubleshooting This section describes some common problems that you may experience when using the projector. Problem or Issue Possible Solutions • Ensure the power cord is properly attached to the projector and to the power outlet. • If the cooling process has not completed, please The projector does not wait until it has finished then try to turn on the turn on...
  • Page 76 Problem or Issue Possible Solutions • Ensure there are no obstacles between the remote control and projector; and that they are within The remote control range, 8 m (26 ft). does not work • The batteries may be out of power, please check and replace if necessary.

  • Page 77: Led Indicators

    LED Indicators When the warning indicators (see below) light up or flash, the projector will automatically shutdown. Unplug the power cord from the projector, wait for 30 seconds and try again. If the warning indicators light up or flash, please contact your nearest service center for assistance.

  • Page 78: Maintenance

    • ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the lens or case. Some chemical cleaners have been reported to damage the lens and/or case of the projector. • ViewSonic® will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.

  • Page 79: Regulatory And Service Information

    Regulatory and Service Information Compliance Information This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer to nameplate labels and relevant markings on the unit. FCC Compliance Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • Page 80: Ce Conformity For European Countries

    CE Conformity for European Countries The device complies with the EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU. Ecodesign Directive 2009/125/EC. The following information is only for EU-member states: The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2012/19/EU (WEEE).

  • Page 81: Declaration Of Rohs2 Compliance

    Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Actual Concentration...

  • Page 82: Indian Restriction Of Hazardous Substances

    Schedule 2 of the Rule. Product Disposal at End of Product Life ViewSonic® respects the environment and is committed to working and living green. Thank you for being part of Smarter, Greener Computing. Please visit the ViewSonic®...

  • Page 83: Copyright Information

    Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic® and the three birds logo are registered trademarks of ViewSonic® Corporation. VESA is a registered trademark of the Video Electronics Standards Association.

  • Page 84: Customer Service

    For technical support or product service, see the table below or contact your reseller. NOTE:  You will need the product’s serial number. Country/ Region Website Country/ Region Website Asia Pacific & Africa Australia www.viewsonic.com/au/ Bangladesh www.viewsonic.com/bd/ 中国 (China) www.viewsonic.com.cn www.viewsonic.com/hk/ 香港 (繁體中文) Hong Kong (English) www.viewsonic.com/hk-en/ India www.viewsonic.com/in/...

  • Page 85: Limited Warranty

    If a product proves to be defective in material or workmanship during the warranty period, ViewSonic® will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
  • Page 86 (e) the serial number of the product. 3. Take or ship the product, freight prepaid, in the original container to an authorized ViewSonic® service center or ViewSonic®. 4. For additional information or the name of the nearest ViewSonic® service center, contact ViewSonic®. Limitation of implied warranties:...
  • Page 87 Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic® shall not be liable for: 1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages.

  • Page 88: Mexico Limited Warranty

    If a product proves to be defective in material or workmanship during the warranty period, ViewSonic® will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components &...
  • Page 89 Exclusion of damages: ViewSonic®’s liability is limited to the cost of repair or replacement of the product. ViewSonic® shall not be liable for: 1. Damage to other property caused by any defects in the product, damages based...
  • Page 90 Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.viewsonic.com/la/soporte/index.htm NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004 Hermosillo: Villahermosa: Distribuciones y Servicios Computacionales SA de CV.

This manual is also suitable for:

Vs20033Ls901hdLs901-4k

Table of Contents