Table of Contents
Advertisement
7
8
9
SOURCE WATER SET UP
Next, screw the female end of
the cold waterline onto the
male end of the Diverter
Valve, and tighten with a
crescent wrench.
Unscrew the Small Diverter
Valve Nut from the smallest
end of the Diverter Valve.
Then place the small Diverter
Valve Nut over the end of the
end of the 3/8-in. PEX Pipe,
pushing the PEX Pipe until it
is aligned evenly with the
end of the Diver Valve
Slide the small Diverter Valve
Nut onto the Diverter Valve
Nozzle threading, tightening
it with a crescent wrench.
Switch the Diverter Valve
lever to the 'On' position,
which is parallel to the 3/8-in.
PEX Pipe.
11
Advertisement
Table of Contents
Need help?
Do you have a question about the Water Machine and is the answer not in the manual?
Questions and answers