Pppoa Configuration - D-Link DSL-504 User Manual

DSL-504 ADSL Router User's Guide

PPPoA Configuration

PPPoA Configuration
PVC
Use this field to assign the VPI and VCI values for the Router. These numbers
are given to you by your DSL service provider and must be entered in order to
establish the ADSL connection.
PPPoA Login
Use this field to assign a Login User Name and Password used for
authentication by your network service provider. Type in the user name and
password in their respective fields. You can use any combination of up to 64
characters (no spaces) in both fields.
The Authentication protocol used to confirm the identity of the user can be
chosen from the pull-down menu. The available protocols are chap (by default)
and pap.
The Connect on Demand pull-down menu toggles either enabled or disabled.
When this function is enabled the router will connect any workstation on your
LAN to the Internet upon request. If this function is disabled, it will be necessary
to access this menu and hit the Connect button each time you want to establish a
34