Line Splitter - D-Link DSL-504 User Manual

DSL-504 ADSL Router User's Guide

Line Splitter

If you are instructed to use a "line splitter", you must install the device between
the Router and the phone jack. Use standard telephone cable with standard
RJ-11 connectors. The splitter has three RJ-11 ports used to connect to the wall
jack, the Router and if desired, a telephone or telephone device. The connection
ports are typically labeled as follows:
Line - This port connects to the wall jack.
ADSL – This port connects to the Router.
Phone – This port connects to a telephone or other telephone device.
The diagram below illustrates the proper use of the splitter.
10
Line Splitter Set Up