Connection Type - D-Link DSL-504 User Manual

DSL-504 ADSL Router User's Guide

Connection Type

Connection Type Window
The default connection method used by the Router for the WAN connection is
PPP over Ethernet. To configure the settings for PPPoE, read the previous
section, PPPoE Configuration. To configure the device for "Bridged Ethernet"
encapsulation as defined by RFC 1483, or PPP over ATM (RFC 2364) use this
menu to change the connection method.
Change the connection method by selecting either Router with RFC 1483 or
Router with PPPoA from the pull down menu in the Encapsulation Protocol
field and click the OK button. If you are changing the connection type to Router
with RFC 1483, read the next section, Static IP Address Configuration. If you are
changing it to Router with PPPoA, read the PPPoA Configuration section.
32