Nat - D-Link DI-LB604 Owner's Manual

DI-LB604 User's Manual

NAT

NAT Configuration:
NAT Routing:
TCP Timeout:
UDP Timeout:
TCP Window Limit:
TCP MSS Limit:
D-Link Systems, Inc.
Advanced > Nat
To enable or disable NAT routing by checking or unchecking the
checkbox. If you disable NAT routing, this device will act as a
Bridge or Static Router. Most features, including Load Balance,
will be unavailable. If some packets whose port number cannot
be translated for special applications, you must input value in port
range for Disable Port Translation.
During the time that TCP expects to receive the acknowledgement
from the destination.
During the time that UDP expects to receive the acknowledgement
from the destination.
The maxmimum number of outstanding packets before TCP
receiving an acknowledgement.
The largest amount of data that can be transmitted in one TCP
packet.
Using the Configuration Menu
30