D-Link DI-LB604 Owner's Manual page 43

DI-LB604 User's Manual
Syslog Delivery
Sending Out:
Keep Sent
Messages:
Syslog Servers:
Log Priority for Modules
Log Priority for
Modules:
Message Status:
D-Link Systems, Inc.
If checked, device will send syslog messages to other machine
(log servers). Note: Even you uncheck it, the system will generate
log messages.
If checked, the sent messages will be kept on device, otherwise
the sent message will be deleted.
•IP Address:
Up to 3 syslog servers can be used.
•Enable:
If checked, the log message will be sent to the server.
You can disable or enable each server temporarily.
•Port:
If your syslog server does not use the default port (514), change it.
•Log Priority Level:
The messages are grouped into 8 priority levels, from Emergency
to Debug. The lower level it is, the fewer messages it will generate.
Emergency is the lowest priority level, and Debug is the highest
one. So set priority to Debug will send all generated messages.
This feature displays and controls current log priority for each
module. For a module with different priorities, the different level of
messages will be generated in Syslog.The lower level of log priority
for module is, the more messages will be generated. DEBUG is the
lowest level of log priority.
Messages sent will be kept only when "Keep Sent Messages"
checked. Currently we keep last 100 messages in RAM area, reboot
or power-off will clear them.
•Clear All: Use this button to clear all unsent messages.
•Submit: It will validate the new settings.
•Reset: It will reserve current settings in flash.
•View Syslog: It will display current messages in Syslog.
Using the Configuration Menu
43