DI-LB604 User's Manual
Static Routing
Static Routing
Static Routing:
Network Address:
Netmask:
Gateway:
Interface:
D-Link Systems, Inc.
If there is more than one router on a network, this Routing table
must be configured because the router needs to know what packet
goes to which router. A routing table entry is required for each LAN
segment on the network.
Network Address is the address of the destination network
segment.
The subnet mask used to select the bits from an IP Address that
corresponds to the subnet.
The IP router that the packets destined to the Network Address will
be forwarded to.
The device's port that the packets destined to the Network Address
will be passed through.
Metric:
The number of routers that must be traversed to reach the destination
network segment.
Advanced > Static Routing
Using the Configuration Menu
22