D-Link DI-LB604 Owner's Manual page 74

Load balancing router

Hide thumbs Also See for DI-LB604:

Table of Contents

DI-LB604 User's Manual

Step 3: Create a new ﬁrewall rule:

Click Enabled. Enter a name (edonkey). Click Allow. Next to Source, select WAN under

interface. In the ﬁrst box, enter an *. Leave the second box empty. Next to Destination,

select LAN under interface. Enter the IP Address of the computer you are running

eDonkey from. Leave the second box empty. Under Protocol, select *. In the port range

boxes, enter 4661 in the ﬁrst box and then 4665 in the second box. Click Always or

set a schedule.

Step 4: Click Apply and then Continue.

D-Link Systems, Inc.

Frequently Asked Questions

Table of Contents