Firmware - D-Link DI-LB604 Owner's Manual

DI-LB604 User's Manual
System Setting
Save Settings To
Local Hard Drive:
Load Settings
Load Settings:
User Name /
Password:
Load Settings
From Local Hard
Restore To Factory
Default Settings:

Firmware

Upgrade Firmware
Upgrade
Firmware:
User Name /
Password:
Upgrade Software
From Local Hard
D-Link Systems, Inc.
You can save current system configuration as a text file on a local
hard disk, and then use the saved configuration file to upgrade
another device later.
You can Load the Settings through this web page.( If you are using
remote Load, you have to enable "Remote Upgrade" and "Remote
Setup" from the Admin page first).
Enter a password which will be used to login to the router.
Select the configuration file from local hard disk.
Drive:
To restore the factory settings to system configuration.
You can upgrade new firmware through this web page.( If you are
using remote upgrade, you have to enable "Remote Upgrade" and
"Remote Setup" from the Admin page first).
The password will be authenticated for firmware upgrade.
Select the firmware file from local hard disk.
Drive:
Tools > Firmware
Using the Configuration Menu
34