Advertisement
Quick Links
Chunky Bunk Bed
Important before assembly:
Version 160217
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the product,
to void scratches and damaging the product or the floor.
Assemble the product as close to its intended final location/room as possible.
Do NOT use any power tools as this may damage the frame.
Health & Safety:
This product or some parts of this product will be heavy. Please use an assistant when lifting.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
Please keep these instructions for future reference.
IMPORTANT - READ CAREFULLY - RETAIN
FOR FUTURE REFERENCE
Julian Bowen Limited
Chunky
Assembly Instructions
Bunk Bed 90cm
Assembly Instructions
www.happybeds.co.uk
Advertisement
Related Manuals for Happybeds Chunky Bunk Bed
Summary of Contents for Happybeds Chunky Bunk Bed
- Page 1 FOR FUTURE REFERENCE Julian Bowen Limited Chunky Assembly Instructions Bunk Bed 90cm Chunky Bunk Bed Assembly Instructions Important before assembly: Version 160217 Read these instructions carefully before assembling or using the product. Please check the contents of the boxes before attempting to assemble this product. The instructions will have a checklist of parts and fittings.
- Page 2 Never drag or push the pieces across a hard or stone floor as this will cause damage to the joints. Use a carpet or a rug for extra care. If you have problems assembling or have damaged or missing pieces, please contact us by visiting: https://www.happybeds.co.uk/customer-service...
- Page 3 HARDWARE PARTS...
- Page 4 Maximum thickness of a mattress on the top tier is 18cm. Please refer to the label or marking on the headboard. This bed has been tested by an independent laboratory and is in compliance with BS EN 747-1 : 2012+A1:2015 - Standard Consumer Safety specification for bunk beds & high sleepers. www.happybeds.co.uk...
- Page 8 “Place the slats onto the side rail supports and distribute evenly using the spacer provided. Attach the centre slat first, as shown in the diagram, by first pushing the side rails together until the slat is flush against the side rail, before inserting the screws.”...
- Page 9 “Place the slats onto the side rail supports and distribute evenly using the spacer provided. Attach the centre slat first, as shown in the diagram, by first pushing the side rails together until the slat is flush against the side rail, before inserting the screws.”...
-
Page 13: General Care And Maintenance
floor as this will cause damage to the joints and could result in failure to the product that will invalidate the warranty. For more information on cleaning and product care visit: https://www.happybeds.co.uk/help-and-advice Notes We’ve tried to make this product as easy to assemble as possible. In the unlikely event that...
Need help?
Do you have a question about the Chunky Bunk Bed and is the answer not in the manual?
Questions and answers