Advertisement
Quick Links
Assembly Instructions
Corona 3+2 Drawer Chest
Important before assembly:
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the product,
to void scratches and damaging the product or the floor.
Assemble the product as close to its intended final location/room as possible.
Do NOT use any power tools as this may damage the frame.
Health & Safety:
This product or some parts of this product will be heavy. Please use an assistant when lifting.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
Please keep these instructions for future reference.
www.happybeds.co.uk
Advertisement
Related Manuals for Happybeds Corona 3+2 Drawer Chest
Summary of Contents for Happybeds Corona 3+2 Drawer Chest
- Page 1 Assembly Instructions Corona 3+2 Drawer Chest Important before assembly: Read these instructions carefully before assembling or using the product. Please check the contents of the boxes before attempting to assemble this product. The instructions will have a checklist of parts and fittings.
- Page 2 Never drag or push the pieces across a hard or stone floor as this will cause damage to the joints. Use a carpet or a rug for extra care. If you have problems assembling or have damaged or missing pieces, please contact us by visiting: https://www.happybeds.co.uk/customer-service...
- Page 3 Vendor: S000238 Page 2 of 12...
-
Page 4: Parts List
Vendor: S000238 PARTS LIST Part Item Part Item Right Side Panel Side Drawer Runner Left Side Panel Middle Drawer Runner Top Panel Back Column Front Frame Cross Rail Bottom Drawer Front Large Drawer Bottom Middle Drawer Front Smaller Drawer Bottom Top Drawer Front Back Panel Larger Drawer Side... - Page 5 STEP 1: Vendor: S000238 Step 2: Page 4 of 12...
- Page 6 STEP 3: Vendor: S000238 STEP 4: Page 5 of 12...
- Page 7 STEP 5: Vendor: S000238 STEP 6: Page 6 of 12...
- Page 8 STEP 7: Vendor: S000238 STEP 8: Page 7 of 12...
- Page 9 STEP 9: Vendor: S000238 Attention! Note: the hole position. STEP 10: Page 8 of 12...
- Page 10 STEP 11: Vendor: S000238 STEP 12: Page 9 of 12...
- Page 11 STEP 13: Vendor: S000238 STEP 14: Page 10 of 12...
- Page 12 STEP 15: Vendor: S000238 STEP 16: Page 11 of 12...
- Page 13 Step 17: Vendor: S000238 Furniture must be fixed to a wall. Step 18: Fix wall strap M to top of furniture using washer N and screw B . With help, move furniture into position. Wall plug and screw are not supplied to attach the wall strap to the wall. The correct type of fixing must be used for your wall, seek professional advice if in doubt.
- Page 14 floor as this will cause damage to the joints and could result in failure to the product that will invalidate the warranty. For more information on cleaning and product care visit: https://www.happybeds.co.uk/help-and-advice Notes We’ve tried to make this product as easy to assemble as possible. In the unlikely event that...