Related Manuals for Happybeds Corona Low End Bed
Summary of Contents for Happybeds Corona Low End Bed
- Page 2 Vendor: S000238 Parts List Hardware List (found in box 2) Part Description Part Description Headend Panel 30 mm Wooden Dowel Footend Panel 40 mm Wooden Dowel Left Headend Post 35 mm Screw Right Headend Post 130 mm Bolt Right Footend Post 130 mm Bolt Left Footend Post Elliptical Nut...
- Page 3 Vendor: S000238 Step 2: Insert hardware part A using a small mallet (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim. Step 3: Attach the left headend post (3) and right headend post (4) to the headend panel (1) and headend rail (9) using hardware parts D and G.
- Page 4 Vendor: S000238 Step 4: Attach the left footend post (6) and right footend post (5) to the footend panel (2) using hardware parts D and G. DO NOT use any power tools as this may damage the frame and will invalidate any claim. Step 5: Attach the side rails (7) using hardware parts E, F and G.
- Page 5 Vendor: S000238 Step 6: Join the two assembled sections together using hardware parts E, F and G. DO NOT use any power tools as this may damage the frame and will invalidate any claim. Step 7: Secure the slats (8) using hardware parts H and C with a screwdriver (not provided). Make sure to start from the ends and work towards the middle.
- Page 6 Vendor: S000238 Step 8: Insert hardware part J using a small mallet (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim. Note: When everything has been assembled, tighten all bolts and attach the wooden buttons to the holes on the bed posts...
-
Page 7: General Care And Maintenance
floor as this will cause damage to the joints and could result in failure to the product that will invalidate the warranty. For more information on cleaning and product care visit: https://www.happybeds.co.uk/help-and-advice Notes We’ve tried to make this product as easy to assemble as possible. In the unlikely event that...