Table of Contents
Advertisement
3.4.10.1
Device Detecting Configuration
Options Summary
Action
Select action that robot should do.
Soft or hard reset
Select reset type robot should send on each boot.
Retry-Count
Fill retry counter here. Robot will reset system at most counter times, and then let
system continue its POST.
At time
Select robot action time: After show logo - Robot will do action after logo is displayed.
System devices are almost ready. Before show logo - Robot will do action earlier before
logo, but some devices may not be ready.
Chapter 3 – AMI BIOS Setup
Reset System
Hold System
Soft
Hard
3
After show logo
Before show logo
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
40
Advertisement
Table of Contents
Need help?
Do you have a question about the AAEON uCOM-ADN and is the answer not in the manual?
Questions and answers