Table of Contents
Advertisement
Options Summary
Enables/Disables SerialIo Controller.
If given device is Function 0 PSF disabling is skipped. PSF default will remain and device
PCI CFG Space will still be visible. This is needed to allow PCI enumerator access
functions above 0 in a multifunction device. The following devices depend on each
other:
I2C0 and I2C1,2,3
UART0 and UART1,SPI0,1
UART2 and I2C4,5
UART 0 (00:30:00) cannot be disabled when:
1. Child device is enabled like CNVi Bluetooth (\_SB.PC00.UA00.BTH0)
UART 0 (00:30:00) cannot be enabled when:
1. I2S Audio codec is enabled (\_SB.PC00.I2C0.HDAC)
Chapter 3 – AMI BIOS Setup
35
Advertisement
Table of Contents
Need help?
Do you have a question about the AAEON uCOM-ADN and is the answer not in the manual?
Questions and answers