Operation - Daymak SWIFT User Manual

Operation

Right Handlebar
1) Lights - There are 3 positions for the lights.
The furthest right position leaves the lights off.
The middle position will have rear running
lights and left most position has all the lights
on.
2) Horn - Press this to honk the horn.
3) 3 Speed Switch - Set it to position 1 for slow-
est speed but furthest range. Set it to position 3
for fastest speed and shortest range.
4) Turn the throttle to engage the motor. Re-
lease it to slow down.
14
Left Handlebar
1) High Beam / Low Beam - Press this button
to angle your headlights up or down.
2) Turn Signals - Push this to the left or right
as you are turning respective to the direction.
Once you are done turning put this back in the
middle position to turn off the signal.
3) Horn - Press this to honk the horn.