URBAN OUTFITTERS Amelia 6 Drawer Dresser Assembly Instructions

Amelia 6 Drawer Dresser
Assembly Instructions
TOOLS REQUIRED BUT NOT INCUDED:
Phillips head screwdriver, Drill, Hammer, Pencil
WARNINGS:
Do not throw away packing materials and carton until after assembly.
Ensure all parts are present prior to assembly.
Contact customer service immediately if parts are missing.
Assemble all parts on a clean smooth surface.
Anti-tip hardware must be in place to ensure safety from tipping.
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight.
Do not place over heat or air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills with a clean white cloth, do not rub.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED:
(A) Dresser x1
(E) Plastic Anchor
06.13.2024
(B) Leg x5
(S6) x2
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.© 2017 UO,
Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
( C ) Screw JP
(#8 x 3/4") x2
(F) Strap x2
URBAN OUTFITTERS
(D) Screw JP
(#8 x 2") x2
(G) Bracket x4
Page 1 of 3