URBAN OUTFITTERS ALONZO BED Assembly Instructions Manual

ALONZO BED
Assembly Instructions
TOOLS REQUIRED BUT NOT INCUDED:
EX. 'Phillips head screwdriver, Level, Hammer' (do not include graphic)
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface

CARE INSTRUCTIONS:

Avoid direct exposure to sunlight. Do not place over heat or air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.

PARTS INCLUDED:

(1) Front / Back Frame x2
(Wrapped in green tape)
(4) Leg x4
(Wrapped in green tape)
(A) Allen Bolt x8
[8mm x 45mm]
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
(2) Side Fram x2
(Wrapped in green tape)
(5) Center Leg x3
(Wrapped in green tape)
(B) Washer x8
[8mm x 20mm]
[20 mm]
(C) Allen Bolt
D) Allen Bolt x3
[8mm x 45mm]
x16
(3) Center Support x2
(Wrapped in green tape)
(6) Slats x2
(Wrapped in green tape)
E) Allen Key x1
x3
Page 1 of 8