URBAN OUTFITTERS ALONZO BED Assembly Instructions Manual

ALONZO BED
Assembly Instructions
TOOL REQUIRED – ALLEN KEY
Do not throw away packing materials and carton until after
assembly. Assemble all parts on a clean smooth surface

CARE INSTRUCTIONS:

Avoid direct exposure to sunlight. Do not place over
heat or Air conditioning vents. Adjust levelers so that
the furniture sits flat on uneven floors. Blot spills do not
rub, with a clean white cloth. Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden
area. You may need to re-tighten all bolts after initial
use.

Parts:

(1) Front and Back Frame x2
(Wrapped in green tape)
(6) Sets of slate x2
(Wrapped in
green tape)
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
(2) Side Frame x2
(Wrapped in
green tape)
(B) Washer x8
(A) Allen Bolt x8
8 MM /45 MM
20 MM
URBAN OUTFITTER
(3) Center Support x1
(Wrapped in
green tape)
(C) Allen Bolt x16
8MM /20MM
(5) Center Leg x3
(4) Leg x4
(Wrapped in
(Wrapped in
green tape)
green tape)
(D) Allen Bolt x3 (E) Allen Key x1
8MM /45 MM
Page 1 of 8