URBAN OUTFITTERS MABELLE 6 DRAWER CHEST Assembly Instructions Manual

URBAN OUTFITTERS MABELLE 6 DRAWER CHEST Assembly Instructions Manual

Advertisement

Quick Links

MABELLE 6 DRAWER CHEST
Assembly Instructions

TOOLS REQUIRED BUT NOT INCLUDED:

MANNER OR CORDLESS SCREW DRIVER
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface

CARE INSTRUCTIONS:

Avoid direct exposure to sunlight. Do not place over heat or Air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.

PARTS INCLUDED

(A) Legs
Quantity: 4pcs

HARWARD LIST

(1) Bolt
M4 x 25mm
Quantity: 12pcs
TIP KIT
(2) Bracket
Quantity: 4pcs
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
(B) Middle Legs
Quantity: 1pc
(3) Nylon strip
M4 x 20mm
Quantity: 2pcs
(C) Handle
Quantity: 6pcs
(4) Screw
M4 x 20mm
Quantity: 4pcs
(5) Screw
M4 x 35mm
Quantity: 4pcs
(6) Wall blug
4 x L40
Quantity: 4pcs
Page 1 of 7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MABELLE 6 DRAWER CHEST and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for URBAN OUTFITTERS MABELLE 6 DRAWER CHEST

  • Page 1 Quantity: 4pcs Quantity: 4pcs Quantity: 4pcs EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC. © 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights. Page 1 of 7 Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
  • Page 2 Assembly Instructions STEP 1. Pull the top drawers out and locate the Hardware inside. EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC. © 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights. Page 2 of 7...
  • Page 3 STEP 2. With help lay the Dresser over and screw in the feet clockwise as shown. EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC. © 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights. Page 3 of 7...
  • Page 4 STEP 3.Align the Handles (C) as shown. Insert the screws(1) from the back and tighten with screwdriver. EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC. © 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
  • Page 5 STEP 4. Align the anti tip brackets (2) to the top back of the case. Insert Screws (4) and tighten completely. Do not overtighten. EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC. © 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights. Page 5 of 7...
  • Page 6 Leaving a little bit of room between the case and the wall. Feed the Nylon Strap through both brackets and pull tight. Side view EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC. © 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights. Page 6 of 7...
  • Page 7 MABELLE 6 DRAWER CHEST Assembly Instructions FINISH EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC. © 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights. Page 7 of 7 Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.

Table of Contents