PEAKnx Controlmini Getting Started page 14

Introduction
Introduction
Note: Detailed instructions can be found on the supplied USB flash drive.


Intended use
Use as an operating panel (input via touch) for KNX-controlled devices
■
Intercom station for compatible door stations
■
Indoor operation, in landscape orientation, display parallel to the wall
■
Do not use device in safety-relevant, humid, dusty or vibration-loaded environments and not
■
under direct sunlight. Do not allow small children to operate the device!
Note: Do not carry out any unauthorized repairs or changes to the unit!


Delivery
Controlmini panel
■
Brief instructions for commissioning the panel and software
■
USB flash drive: YOUVI Basic software package, Controlmini user manual
■
Network connector
■
Network patch cable
■
Cleaning cloths for the touch screen
■
Panel mounting and installation
Important safety and handling information
Commissioning may only be carried out by qualified electricians!
Pay attention to the „Five Safety Rules" (DIN VDE 0105, EN 50110).
■
Before installation, make sure that all connecting cables of the device are
■
undamaged.
Warning
14