Step 9 - Plugging In All Devices - D-Link DI-308 User Manual

The router can now be accessed via the LAN by Telnet, the Web-based DI-308
Router Configuration Utility (included with the router) and other SNMP
management applications.
If you have any questions regarding the settings you made or other settings in the
submenus, please refer to the next chapter, "Configuration and Management."
Step 9 – Plugging in All Devices
You can now plug in and power on all other devices connected to the router. Then
power on the router.
The router is now able to use the LAN ports.
The router must be further configured in order to get the built-in ISDN modem to
function properly, to perform other routing functions, and to manage your IP
network. This can now be done by using the console, the included Web-based
Configuration Utility or Telnet.
For more information about configuring or managing the router, please refer to the
next chapter, "Configuration and Management."
Choose the Telnet/Discovery Enable option to enable Telnet if it has not been
done so already.
Position the cursor on the Save option at the bottom of the screen and press
<Enter> to save the new settings.
Choose Exit in the submenus to return to the Main Menu.
15
DI-308 ISDN Remote Router