Mix Window - Yamaha LS9-16 Owner's Manual

MIX window

In this window you can view and edit the parameters of MIX channels 1–16. The parameters shown in the window
can be selected from the [View] menu or the menu that appears when you right-click (<control> key + click) in the
window.
You can access this window in the following ways.
●
From the [Windows] menu, choose [Overview] and then choose "MIX"
●
Use the layer keys in the Master window to turn on the [MIX] button
●
On the LS9 console, assign a USER DEFINED KEY to [LS9 EDITOR CONTROL]-[OVERVIEW]-[MIX], and execute it
1
2
3
4
A
OUTPUT PATCH
Click here to select the output port that will be assigned to the MIX channel, from the
following choices.
(*)
OMNI1–OMNI16
SLOT1-1...SLOT1-16,
SLOT2-1 (*) ...SLOT2-16
RACK1A, RACK1B...
RACK5L(A)...RACK8R(B)
2TR OUT L, 2TR OUT R
REC IN L, REC IN R
(*) OMNI jacks 9–16 and SLOT2 can be viewed only if you're editing offline and have selected LS9-32 in
the Model Select field of the Mixer Setup screen, or if you're editing online with the LS9-32 connected.
If multiple patches have been made, only the first port is shown.
If you change the patching in this window, the port that had been assigned until then
will be cancelled, and only the newly selected port will be assigned.
B EQ (Equalizer)
Switches the EQ on/off. This is the same as the equalizer for INPUT CH (➥ p.14).
C
DYN1(Dynamics 1)
Switches the dynamics processor on/off. This is the same as the dynamics 2 for INPUT
CH (➥ p.14).
D
INS (Insert)
Enables/disables the insert-in.
(*)
OMNI jacks 1–16
Output channels of an I/O card installed in a slot
(*)
L/R outputs of Rack 1–8
L/R channels of the 2TR OUT DIGITAL jack
L/R channels of the USB memory recorder input
18 LS9 Editor Owner's Manual