Mix Window - Yamaha CL1 Owner's Manual

MIX window

In this window you can view and edit the parameters of MIX channels 1–24. The parameters shown in the window can be
selected from the [View] menu or the menu that appears when you right-click (<control> key + click) in the window.
You can access this window in the following ways.
• From the [Windows] menu, choose [Overview] and then choose "MIX1-16 or MIX17-24"
• Use the bank select keys in the Master window to turn on the [MIX1-16] button or [MIX17-24] button
1
2
3
4
1
Output Patch
Click here to select the output port that will be assigned to the MIX channel, from the fol-
lowing choices.
NONE
DANTE 1–DANTE 64
OMNI 1-OMNI 8
REC L, REC R
SLOT1-1, SLOT1-2...SLOT3-16
FX1L(A), FX1R(B)...FX1L(A), FX8R(B)
PR1L(A), PR1R(B), PR2L(A), PR2R(B)
DIGI L, DIGI R
If multiple patches have been made, only the first port is shown.
If you change the patching in this window, the port that had been assigned until then will be
cancelled, and only the newly selected port will be assigned.
2
EQ (Equalizer)
Switches the EQ on/off. This is the same as the equalizer for INPUT CH (➥ p.13.)
3
DYNA1 (Dynamics 1)
Switches the dynamics processor on/off. This is the same as the dynamics 2 for INPUT CH
(➥ p.13.)
4
INSERT
Enables/disables the insert-in.
No assignment
DANTE OUTPUT 1–64
OMNI OUT jacks 1–8
L/R inputs of RECORDER
Output channels of an I/O card installed in slot 1–3
L/R inputs of EFFECT rack 1–8
L/R inputs of PREMIUM rack 1–2
L/R channels of the DIGITAL OUT jack
17 CL Editor Owner's Manual