Mixer Setup - Yamaha LS9-16 Owner's Manual

Ls9 editor owner's manual
Hide thumbs Also See for LS9-16:
Table of Contents

Advertisement

❏ Mixer Setup
To open the Mixer Setup window, choose [Mixer Setup] from the [File] menu.
A
ModelSelect
Here you can specify the model of LS9 console. This is set automatically when the Editor synchronizes with the
LS9 console.
B
Mix Bus Setup
Here you can make settings relating to the MIX buses.
Signal Type:
This specifies whether each two adjacent odd-numbered/even-numbered MIX buses will be used
as MONO x2 or STEREO.
Bus Type/Pre Fader Send Point:
even-numbered MIX buses will be VARI (PRE EQ), VARI (PRE FADER), or FIXED.
Pan Link:
This is valid only when the Signal Type is STEREO and the BUS TYPE is VARI; when enabled, the
PAN setting sent to the stereo MIX bus will be linked with the PAN to the STEREO bus.
C
Matrix Bus Setup
Here you can make settings relating to the MATRIX buses.
Signal Type:
This specifies whether each two adjacent odd-numbered/even-numbered MATRIX buses will be
used as MONO x2 or STEREO.
1
2
3
Specifies whether the Send Point of each two adjacent odd-numbered/
3
LS9 Editor Owner's Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ls9-32Ls9 editor

Table of Contents