Yamaha CL1 Owner's Manual page 66

1
4
5
4
EFFECT NAME
Indicates the title of the currently selected PREMIUM rack module.
5
TYPE (Module type)
Indicates the currently selected PREMIUM rack module type.
Selecting the module type is not available in the PREMIUM rack.
NOTE
6
LIBRARY
This button accesses the Premium rack library. Clicking this button will open the PREMIUM rack module (EQ or com-
pressor) page of the Premium Rack Library window.
7
9
7
9
2 3
1
Rack No. (Rack selection)
Select the PREMIUM rack module that you want to control.
2
BYPASS
This button temporarily bypasses the PREMIUM rack module.
3
CUE
This button cue-monitors the output of the currently selected
PREMIUM rack module.
6
7
Input patch
Click the CHANNEL field (Click L CHANNEL or R CHANNEL area for the
stereo EQ or compressor), and choose one of the following as the signal route
that will be patched to the input channel(s) of the currently selected PRE-
MIUM rack module.
NONE
8
MIX 1–24
MATRIX1–8
ST L, ST R, MONO(C)
INS CH 1–72(*)
INS MIX 1–24
INS MTRX1–8
INS ST L, INS ST R, INS M(C)
(*) CL3: 1-64, CL1: 1-48
The channel name is shown in the boxes immediately below.
<
8
Input meter
Indicates the level of the signal being input to the PREMIUM rack module.
When the stereo EQ or compressor has been selected, display the meter of
both the L/R.
9
Output patch
Click the CHANNEL field (Click L CHANNEL or R CHANNEL area for the
stereo EQ or compressor), and choose one of the following as the signal route
that will be patched to the output channel(s) of the currently selected PRE-
MUIM module.
NONE
8
CH 1–72(*)
STIN1L–STIN8R
INS CH 1–72(*)
INS MIX 1–24
INS MTRX1–8
INS ST L, INS ST R, INS M(C)
(*) CL3: 1-64, CL1: 1-48
The channel name is shown in the boxes immediately below.
0Output meter
<
Indicates the level of the signal being output from the PREMIUM rack module.
When the stereo EQ or compressor has been selected, display the meter of both
the L/R.
66
If the Channel Select/Sends On Fader checkbox
NOTE
in the System Setup dialog box is not checked,
the [CUE] button will be hidden in the screen.
No assignment
MIX channel 1–24(only for rack 1-2)
MATRIX channel 1–8(only for rack 1-2)
STEREO channel L/R, MONO channel (only
for rack 1-2)
INPUT CH 1–72(*) insert out
MIX channel 1–24 insert out
MATRIX channel 1–8 insert out
Insert-out of STEREO channel L/R or the
MONO channel
No assignment
INPUT CH 1–72(only for rack 1-2(*))
ST IN channel 1–8 L/R (only for rack 1-2)
INPUT CH 1–72(*) insert in
MIX channel 1–24 insert in
MATRIX channel 1–8 insert in
Insert-in of STEREO channel L/R or the
MONO channel
CL Editor Owner's Manual