Yamaha CL1 Owner's Manual page 5

8
CH OPERATION
INPUT, ST IN, MIX, MATRIX, ST/MONO, DCA:
HA: Change the operating privileges for the head amp gain (analog gain) and phantom power of the selected chan-
nels.
PROCESSING:
Change the operating privileges for overall signal processing parameters (except for fader and
[ON] button) of the selected channel. For the specific parameters included in PROCESSING, refer to the CL's man-
ual.
FADER/ON:
Change the operating privileges for the pan/balance, fader, channel on, send on/off, and send level of
the selected channels.
Set All:
Turn on HA, PROCESSING, and FADER/ON for all channels.
Clear All:
Turn off HA, PROCESSING, and FADER/ON for all channels.
Set by One Click:
and FADER/ON to On or Off simultaneously.
9
SCENE LIST
STORE/SORT:
Change the operating privileges for scene store and sort operations.
RECALL: Change the operating privileges for scene recall operations.
0
LIBRARY LIST
STORE/CLEAR:
RECALL:
Change the operating privileges for library recall operations.
A
FILE LOAD
USER SETUP:
Change the operating privileges for loading user-defined keys and preferences when loading a file.
SYSTEM SETUP MONITOR SETUP:
setup settings when loading a file.
CURRENT SCENE:
SCENE LIST:
Change the operating privileges for loading the scene list when loading a file.
LIBRARY LIST:
Change the operating privileges for loading the library list when loading a file.
B
CURRENT SCENE
INPUT PATCH:
Change the operating privileges for input patch operations.
INPUT NAME:
Change the privileges for editing the input names.
OUTPUT PATCH:
OUTPUT NAME:
BUS SETUP:
Change the operating privileges for buses.
GEQ 1-16:
Change the operating privileges for GEQ (Graphic Equalizer) rack operations.
EFFECT:
Change the operating privileges for EFFECT rack operations.
PREMIUM RACK:
MUTE GROUP ASSIGN:
MUTE GROUP MASTER:
C
MONITOR SETUP
OSCILLATOR:
Change the operating privileges for oscillator settings.
TALKBACK:
Change the operating privileges for talkback settings.
D
SYSTEM SETUP
MIXER SETUP:
Change the privileges for making mixer setup settings.
OUTPORT SETUP:
MIDI:
Change the privileges for making MIDI settings.
E
Create
Creates the user key.
F
Cancel
Closes the dialogbox.
If this button is on, pressing the channel select button repeatedly will set HA, PROCESSING,
Change the operating privileges for library store and clear operations.
Change the operating privileges for loading system setup and monitor
Change the operating privileges for loading the current scene when loading a file.
Change the operating privileges for output patching.
Change the privileges for editing the output names.
Change the operating privileges for PREMIUM rack operations.
Change the privileges for assigning mute groups.
Change the operating privileges for enabling/disabling mute groups.
Change the privileges for making outport setup settings.
Select the channels whose parameters will be operable.
5 CL Editor Owner's Manual