Mute Group - Yamaha CL1 Owner's Manual

❏ DYNAMICS1
Except for the fact that the available types are COMPRESSOR, EXPANDER, COMPAND H and COMPAND S, and that
you can select more than one signal as the key-in signal, this is the same as the dynamics for input channels (➥ p.30.)
❏ INSERT
Except for the fact that the insert ports that can be selected are different, this is the same as for the insert settings of an
input channel (➥ p.34.)
❏ RECALL SAFE/MUTE SAFE
These are the same as the Recall Safe and Mute Safe functions for input channels.
❏ MUTE GROUP
Selects the mute group (1–8) to which the MIX channel belongs.
❏ Fader
1
2
3
1
ON
Switches the MIX channel on/off.
2
Fader
Adjusts the output level of the MIX channel. A meter indicating the signal level is shown at
the right of the fader, and the current value is shown in the numerical box immediately
below. You can set this to the minimum value (–∞ dB) by holding down the <Ctrl>(< >)
key of your computer keyboard and clicking the fader knob, or set it to the nominal value
(0.00 dB) by holding down the <Ctrl>(< >) key and <Shift> key and clicking the fader
knob.
3
CUE
This button cue-monitors the signal of the MIX channel.
NOTE
If the Channel Select/Sends On Fader checkbox in the System Setup dia-
log box is not checked, the [CUE] button will be hidden in the screen.
40 CL Editor Owner's Manual