Yamaha CL1 Owner's Manual page 59

3
Module graphic
This area shows a graphic of the effect module or the GEQ module that is currently assigned to the rack, and the
parameters of that module. Double-click this to open the module editor for that rack unit. By holding down the
<Ctrl>(< >) key of your computer keyboard and double-clicking this, you can open multiple rack module editors. For
these additional editors, the rack select buttons are not linked with the RACK popup window of the CL itself.
4
Input meter/Output meter
These indicate the level of the signals being input and output from the effect module or the GEQ module.
5
Output patch
Click the L CHANNEL or R CHANNEL area, and choose one of the following as the signal route that will be patched to
the L/R output channels of the internal effect.
NONE
CH 1–72(*)
STIN1L–STIN8R
INS CH 1–72(*)
INS MIX 1–24
INS MTRX1–8
INS ST L, INS ST R, INS M(C)
(*) CL3: 1-64, CL1: 1-48
6
BYPASS
This switches the effect module or the GEQ module between active and bypassed states. An effect module is active
when the BYPASS button is dark.
No assignment
INPUT CH 1–72(*)
ST IN channel 1–8 (L/R)
INPUT CH 1–72(*) insert in
MIX channel 1–24 insert in
MATRIX channel 1–8 insert in
Insert-in of STEREO channel L/R or the MONO channel
59 CL Editor Owner's Manual