Yamaha CL1 Owner's Manual page 23

5
6
7
8
9
0
A
5
BALANCE
Adjusts the left/right balance of the STEREO channel.
For MONO channels, this control indicates the send level to the MATRIX bus.
6
SEL (Channel selection)
Selects the channel for which you want to make settings. (You can specify L and R indepen-
dently.)
7
CUE
This button cue-monitors the signal of the STEREO/MONO channel.
If the Channel Select/Sends On Fader checkbox in the System Setup dia-
NOTE
log box is not checked, the [CUE] button will be hidden in the screen.
8
ON
This switches the STEREO/MONO channel on/off.
The button is color-coded and indicates status as follows:
White: STEREO/MONO channel is on (normal mode.)
Black: STEREO/MONO channel/Send is off.
Other colors: Send is on (SENDS ON FADER mode.)
9
Fader
Adjusts the output level of the STEREO/MONO channel.
The current fader value is shown in the numeric box immediately below the fader.
The numbers and alphabetical letters at the right of the fader indicate the mute groups to
which that channel belongs, and show the Recall Safe and Mute Safe status of the channel.
(For the significance of the numbers and alphabetical letters, see ➥ p.18.)
The fader is color-coded and indicates status as follows:
White: You can adjust the input level of the STEREO/MONO channel (normal
mode.)
Gray: STEREO/MONO channel is off.
Other colors: You can adjust the send level (SENDS ON FADER mode.)
Click the indicator area at the right side of the fader to switch between 3
NOTE
indicators (mute group indicator, mute safe/recall safe indicator, level
meter).
0
Channel number
This is the channel number (ST or M.) You can double-click this number to open the
Selected Channel window for this channel. If you hold down the <Ctrl>(< >) key of your
computer keyboard and double-click this, the Selected Channel window will open as an
additional view.
A
Channel name
This is a text box that displays the channel name. You can also edit the channel name in this
text box.
23 CL Editor Owner's Manual