Using Pptp With A Dsl Modem - D-Link DI-304 User Manual

Using PPTP with a DSL Modem

PPTP Setup
ISP Access Setup
ISDN Dial Backup Setup
PPP Setup
♦
PPTP Link – Check Enable to enable a PPTP client to establish a tunnel
to a DSL/Cable modem.
♦
PPTP Server IP Address – Specify the IP address of the PPTP-enabled
DSL/Cable modem. Refer to the user manual of the PPTP-enabled
DSL/Cable modem.
Click Internet Access Setup → PPTP to enter the setup page. The following
setup page is just for example. Your DSL/Cable service should provide the
exact settings.
♦
ISP Name – Enter the ISP name.
♦
Username – Enter the ISP supplied username.
♦
Password – Enter the ISP supplied password.
♦
Scheduler (1-15) – Enter up to 4 index numbers for calls that have been
previously configured on the Call Schedule Setup windows (under
Advanced Setup).
♦
Dial Backup Mode – Select None to disable this feature or select Packet
Trigger to activate this feature.
♦
PPP Authentication – Select PAP or CHAP for widest compatibility.
35
DI-304/DI-304M ISDN Remote Router